Spray
Fenders mount to each individual row unit to provide optimum height control.
They are 16 ga. sheet metal,18” high and 48” long. They are adjusted
in or out from the cultivator row unit towards the crop row. They are equipped
with an abrasive resistant steel runner allowing the stiffened fender to
run directly on the ground or can be carried above the ground with the cultivator
row unit. 2” wide pivot points with bushings keep the fender free floating
over ground contours. Spray nozzle mounts at the rear of each fender allow
for a wide range of height settings.
Orthman Manufacturing, Co. - serving agriculture with quality products since 1965.
