Atlas Dry Fertilizer Distribution System

AtlasLiquidFertilizerSys

OrthmanMfg
 
FEMA
   

The Orthman Atlas Dry Fertilizer Cart.

Orthman’s reputation for continually meeting the needs of the innovative agricultural producer has resulted in the development of the Atlas Dry Fertilizer Cart. The Atlas fertilizer distribution system is an invaluable extension your existing strip-till implement. The versatile design of the Atlas Cart accommodates 30, 36, 38, and 40 inch row spacing 1tRIPr machines and virtually any 7 inch square toolbar on the market. Various models of the Atlas Cart lifting drawbar hitch will attach directly to an existing Orthman 1550 double toolbar CAT 3 or 4 hitch or your Orthman CAT 3/3N 5x7 hitch.

Now more than ever, Orthman is allowing the producer to precisely place fertilizer for season-long plant uptake. Teaming the 1tRIPr and the Atlas Cart alleviates historical dry fertilizer issues including runoff and soil dislocation due to wind or water. Simply put, dry fertilizer application with the Atlas Cart and 1tRIPr precisely places dry fertilizer in the root zone while creating a homogenous mixture of fertilizer and soil for the crop to easily access.


   

AtlasCartThe Orthman Atlas Cart was designed specifically to allow producers to even further capitalize on single pass efficiency. The lifting cart is available with your choice of a dry fertilizer bulk tank with a capacity of 6 tons or dual liquid tanks with a carrying capacity
of 1,000 gallons.

Both of these entirely hydraulically driven systems, allow for fertilizer to be applied with the Orthman 1tRIPr or virtually any fertilization tool utilizing an industry standard 7x7 toolbar.


    AtlasCartThe Atlas Cart lifting drawbar hitch is available in models to attach directly to your Orthman 1550 folding double bar (pictured above) CAT 3 or 4 hitch or your Orthman 1500 folding toolbar (pictured below) CAT 3/3N 5x7 hitch. Lift arm spacings are available in 60, 72, and 78 inches and fully adjustable axles for wheel spacings of 120, 144, 152, and 160 inches accommodate 30, 36, 38, and 40 inch 1tRIPr folding or non-folding machines.

The design of the Atlas Cart and its superior strength is derived straight from the Orthman 1096 Grain Cart and the use of heavy duty 10 bolt hubs, replaceable spindles, and the super heavy duty adjustable axle design to outlast any other cart on the market.


    AtlasCartThe Hi-load 14.9R46 radial cart tires with stubble guard tread provide superior tread wear, reduced lug induced vibration, and higher load capabilities over standard radials. The narrow tire width of 15.7 inches match up perfectly with the 1tRIPr strip tillage zone. The classic heavy duty Orthman TH4 hitch can easily be added to the rear of the cart for additional fertilizer carrying capacities.

    AtlasCartThe cart lifting cylinders and tongue lift cylinder utilize a hydraulic tee-block to promote even lifting and the use of only one SCV. The cart design allows clearance for the 1tRIPr basket options and also 1tRIPr AR row unit trip (and reset) with the basket option. Standard equipment also includes safety lighting, SMV and safety reflectors, and a drawbar safety chain.

    AtlasCartThe lifting drawbar hitch and lifting cylinders (above) along with the innovative design of the cart to implement arms (right) allow for the implement to be lifted up to 60” from the bottom of the toolbar to the ground without lifting the bulk fertilizer (liquid or dry) container for excellent field turning and road transport ground clearance.

   

Lifting Atlas Cart Specifications:
• Lift arm spacings of 60" 72" and 78"
• Accommodates row spacings of 30" 36" 38" and 40"
• Hydraulic tee-block for single SCV lifting
• Hi-load 14.9R46 with stubble guard tread
• Lift height of 60" from ground to bottom of 7" sq. toolbar
• Overall length of 24 ft. overall height 7 ft. (liquid) and 10 ft. (dry)
• Adjustable axles for cart wheel spacings of 120" 144" 152" 160"

Dry Fertilizer Tank Specifications:
• Volume of 185 cu. ft. and capacity of 6.0 tons
• Material - 409 stainless steel with powder coated finish
• Opening lid size of 58" x 38"
• Bin screen is standard equipment
• Hydraulic drive axial piston motor
• Hydraulic flow of 12.5 to 15 GPM at 2200 psi
• 16 horsepower requirement
• 2 metering assemblies and either 8, 12, or 16 outlets (hoses)
• Capacity at 30" row spacing of 400 lbs. per acre @ 6 mph
• Metering range of 25 to 400 lbs. per acre
• 2" ID flex hose from outlets to diffuser
• 1 1/4" ID flex hose from diffuser to row unit boot

Liquid Fertilizer Tank Specifications:
• Dual 500 gallon poly tanks totaling 1,000 gallon capacity
• Optional factory installed micro-tube Agri-Inject system
• Other Agri-Inject systems available upon request
• Dual tanks reduce slosh and increase machine stability

 

Orthman Manufacturing Incorporated
75765 Rd. 435 - Lexington, NE - 68850 - ph. 308.324.4654 - fax. 308.324.5001